The
DMDC test environment is a shared test environment among many DMDC
customers, as well as all TRICARE Program support contractors. Not
only is the environment shared, so is the data within that environment.
This environment is used for both contractor testing and training.
1.1 Releases
1.1.1 Typically,
as fixes are applied and tested, the modified software will be installed
for contractors’ testing. DMDC will coordinate with the Defense
Health Agency (DHA) and the contractors when the test environment
will be upgraded with software for the next major release (as opposed
to continuing software modifications for the current release). The
following information provides the general schedule for moving applications
into and through the contractors’ test environment and finally into
Production.
1.1.1.1 DMDC will notify DHA one week prior to moving
an application that requires contractor testing to the contractors’
test environment; and DMDC will also provide a copy of the release
notes for DHA review and coordination of the date the application
will be moved to contractor test. DHA will notify contractors of
the application release date and provide a copy of the release notes
during regularly scheduled Integration meetings hosted by DHA.
1.1.1.2 Applications
that require contractor testing, including those that only require
regression testing, will remain in contractor test for a minimum
of two weeks prior to moving into Production. A longer testing period
may be required based on the complexity of the changes and/or testing requirements.
1.1.1.3 A major
release, which requires only regression testing, would remain in
contractor test for one month.
1.1.1.4 A major
release which requires testing for functional changes would remain
in contractor test for a minimum of six weeks or longer, as coordinated
with the contractors, based upon the complexity of the changes and/or
testing requirements.
1.1.1.5 Generally,
new versions of applications will not be moved into contractor test
during the two weeks prior to an application or release moving into
Production.
1.1.1.6 DHA will
coordinate the movement of a new version of an application from
contractor test to Production with contractors during regularly
scheduled Integration meetings hosted by DHA. The determination
to move an application from contractor test will be made based on
each contractor’s readiness, test results and controlling Program
requirements.
1.1.2 There will be a baseline set
of test data supplied by DMDC to the contractors to establish a synchronized
set of test data. DMDC will coordinate changes with contractors
to the baseline set of Department of Defense (DoD) Identification
Numbers, DoD Benefits Numbers (DBN), and Social Security Numbers
(SSNs). The test environment is populated with new test data periodically.
Refreshes may be performed approximately every three weeks; the
specific schedule will be established by DHA and DMDC and coordinated
with the contractors. Any deviation from the published schedule
requires agreement from DHA, DMDC, and contractors.
1.1.3 Data refreshes
may also be required on an ‘as needed’ basis to return the data
to the baseline. To ensure contractors’ data remains in sync with
Defense Enrollment Eligibility Reporting System (DEERS), contractors
are required to return to the baseline concurrent with DEERS. The
data refresh schedule will be determined by DHA and DMDC, and coordinated
with contractors as appropriate. Requests for modification of the
refresh schedule must be submitted through the Contracting Officer
(CO) and/or the Contracting Officer’s Representative (COR) to the
DHA Performance, Analysis, Transition, and Integration Section (PAT&IS)
or equivalent office for review and consideration. DHA PAT&IS
will coordinate the request with DMDC and contractors as appropriate. Contractors
will be notified by a DHA representative of the outcome of the review
at the Integration meeting. The contractor shall submit systems
integration test plans in accordance with Section
J of the contract.
1.1.4 Notifications
for new releases of software or applications will be sent to the
contractors as required. Emergency fixes are evaluated and, depending
on the scope and severity may be released by DEERS to Production
prior to the contractors’ test region. Notification of such an emergency
release will be sent via e-mail. Upon notification of software changes
made available for testing, contractors are required to test and
validate the specific software modification and verify via regression
testing that all other functionality has not been negatively affected.